Anyone who does a little research before buying new furniture, especially patio furniture, will almost certainly run across a few ads for Teak Patio Chairs. One of the first things buyers will notice is that teak wood furniture is regularly among the most pricey. Why? The reason for this is due to both teak’s beauty and its durability. Aside from its beauty, it also has several natural qualities that other woods do not.
Teak can be found in Southeast Asian countries such as Thailand, Burma, and Malaysia, although no national government takes teak as seriously as Indonesia’s. The Indonesian government has maintained a business committed to managing one of the country’s most precious natural resources since the country’s post-colonial era started in the mid-20th century. PT Perhutani is in charge of the official teak plantations on the Indonesian island of Java. They would be harvesting a certain amount of trees each year. So, the fresh ones replace the trees used for harvesting.
They used mature trees to produce the best Teak wood furniture. Harvesting wood from a teak tree planted today may take up to 80 years. Because teak is such an excellent wood material, old teak is frequently salvaged – for example, from ancient structures due for demolition – and given new life as furniture.
Bajanusa takes pride in manufacturing the highest quality teak patio furniture or teak patio chairs with cushions at reasonable costs. Whether you choose to purchase from us or not, we recommend you follow this advice and ask the shop several questions before proceeding with your furniture purchase.
Which Teak Patio Chairs are Better: Fully Machined, Semi-Machined, or Handmade?
The best furniture is fully machine-made. All of Bajanusa’s garden furniture sets are entirely machine-made. Due to investments in gear, technology, training, and tight processes, fully machine-manufactured teak garden furniture is more expensive to create (approximately 50% more expensive in Indonesia) than handcrafted or partially machine-made teak garden furniture.
The proportion of wood-on-wood contact will be close to 100%. Two stacking armchairs from our manufacturing, for example, will be fundamentally similar in every manner. Machine-made joints and components fit smoothly and precisely every time, ensuring a lifetime. With the excellent fit, the furniture has strength derived from the mortice and tenon joint rather than glue. Following our quality control method, each piece of furniture is constructed and disassembled in our facility before being shipped.
The factory created semi-machine patio chairs with hand-powered equipment and hand-fitted components. The finished outcome relies entirely on the individual producing the furniture’s training, experience, and talents. Because of the constant turnover of personnel in the ‘factories,’ predicting the quality of the ultimate product is exceedingly tricky.
Handmade manufacture evokes romantic thoughts, yet it is the most cost-effective way to create teak furniture since labor expenses in Bajanusa are pretty low. The Indonesian ‘cottage industry’ establishes this type of furniture in their homes and patios by carpenters and employees.
Teak patio chairs created by hand will never be identical and will be less than flawless. Often, techniques of repairing timber are erratic and subpar; wood filler is frequently employed to conceal knots and defects. The tenon joint is frequently too short and does not touch the end of the mortice, relying on glue for support. Because of these flaws, the furniture will not endure a season.
Keep Teak Away from Chemical Treatments
Used to confuse and trick customers into believing they are purchasing Grade A teak.
The factory treated some teak with H2SO4 (sulphuric acid) harmful acidity. The intent is to make the wood look uniform and smooth out the uneven texture of poor-quality teak. The chemical is hazardous, and particles from sanding/normal wear and tear can cause respiratory problems and minor internal or external burns. The chemical is dangerous that pregnant women should avoid.
H2 O2 (hydrogen peroxide) is another typical chemical treatment used to conceal the look of low-quality teak. These chemicals will dry the wood, creating brittleness, and will deplete the natural oil content, weakening the timber to softwood qualities.
How to Spot?: Look for wood that is strangely dark in color. If you believe it is a chemically treated teak, search for specific pieces lacking grain. If both sides of the item have the same color, it is most likely chemically treated teak.
Moisture Content and Kiln Drying
Teak patio chairs of high quality are identified by more than simply their Grade. If the woodsman did not dry the Grade A teak to a maximum of 12%, moisture content would not last. The moisture content (the quantity of water in the wood) influences the drying behavior of the Teak. Moist Teak with high moisture content is significantly more prone to warping, shrinking, cracking, and splitting.
Why don’t suppliers and manufacturers properly kiln dry wood? Said, it’s a cost-cutting measure! Kiln dryers are costly to operate, purchase, maintain, and install. Most Indonesian “factories” lack kiln dryers. The estimation of kiln drying charges accounts for more than 35% of the cost of a fully kiln-dried piece of teak garden furniture. Suppliers may save much money by not using a kiln drying technique. All trustworthy furniture stores will understand what they are receiving from their suppliers; if they don’t, you can guarantee it’s full of water.
It is typical to observe what we term “furniture forests” throughout Java, Indonesia. These outdoor spaces are where producers air dries newly created ‘green’ furniture or lumber. Air drying in a place where humidity levels range from 70 percent to 96 percent is akin to trying to dry a towel in a steam room, i.e., impossible. You can get this identical outdoor furniture on several ‘cheap’ websites and well-known auction sites.
Even the tiny percentage of producers with Kiln dryers installed frequently fail to dry the Teak adequately with the proper schedules and temperatures. These ovens are exceedingly expensive, and the drying process is lengthy. If the producer tries to dry the wood too rapidly, it can crack. It would warp and be rendered useless. It is also far more time-consuming and expensive to dry Teak from 12% to 8% than from 22% to 18%.
To remain competitive, they will, if they are lucky, dry the wood to only 22 percent moisture content before removing it to begin constructing the furniture. Please remember that poorly dried lumber will be heavier due to excessive water content. Suppose you are going to acquire such teak patio chairs with arms or garden furniture. In that case, we recommend that you select standard hardwood furniture because all of the redeeming attributes of teak are non-existent. Your teak furniture will be worthless in as little as one season unless maintained often.
Quality Control, Design, And Workmanship
Glue:
Good quality merchants use strong, long-lasting European polyurethane or PVA and resin glues to guarantee that your furniture lasts a long time. To keep prices down, usually, lesser-grade inexpensive glues are used. Low-quality adhesive will fail, and your teak garden furniture will not last. The low-quality sealant will fail, and your teak garden furniture will not last.
Hardware:
Building the teak patio chairs with marine-grade, high-quality brass or stainless steel would be best. Low-quality fixtures and fittings corrode fast, compromising the beauty and strength of your furniture.
Quality Control:
Quality merchants often operate their factories and follow tight practices. Because we use our facility, we have a professionally trained in-house staff of European Quality Controllers. They will verify the standards and follow the processes consistently.
Each piece of furniture manufactured in our facility has its unique identification number, and the three layers of quality control must approve this. It guarantees that no subpar furniture reaches the buyer. There is an excellent likelihood that the teak patio chairs will have difficulties if no quality control methods are in place.
Shaped Timber:
Curved slats, seats, and seat backs are more comfortable, but they need more extensive pieces of wood and cost more to build.
Design:
We devote significant time, technology, and money to our designs to guarantee that every item of our garden furniture collection is comfortable and perfectly proportioned.
Suppose you decide to take the step and buy well-made teak patio chairs and a table with a low water content that has been certified to have been sustainably harvested from the PT Perhutani forestry reserve. In that case, you won’t have to do anything but sit back and enjoy it. You’ll pay a premium for your furnishings, but you’ll most likely be pleased with your buy in the long run.
Final Takeaway
Bajanusa teak patio chairs are entirely machine-made from high-quality, sustainable teak. Our hardware is all constructed of high-quality stainless steel. All of our furniture comes with a ten-year warranty. We guarantee to give our clients outstanding quality at reasonable pricing. For more information on teak, don’t hesitate to stop in our showroom for a sit test.
No responses yet